Insights and Resources on Industrial Reliability Solutions
E&I Core Proficiencies: The Skills Every Technician Should Have — But Most Don’t
The Skills Every Technician Should Have — But Most Don’t When an E&I program quietly underperforms, the cause is rarely…
Read more
Particle Contamination in Bearings – How Cleanliness Directly Impacts Bearing Life
How Cleanliness Directly Impacts Bearing Life Contamination from solid particles is one of the most significant, and most controllable, causes…
Read more
The Real Cost of Poor Bearing Lubrication – Downtime, Energy, and Replacement
What the Numbers Actually Show The lubricant budget at most industrial plants is 1 to 3 percent of the total…
Read moreUnder-Lubrication and Starvation in Bearings: How Too Little Grease Leads to Friction, Heat, and Failure
How Too Little Grease Leads to Friction, Heat, and Early Failure Bearing failure investigations almost always start with the same…
Read moreOver-Lubrication in Bearings – Why Too Much Grease Causes Heat, Seal Damage, and Premature Failure
Why Too Much Grease Causes Heat, Seal Damage, and Premature Failure The logic seems obvious: bearings need grease to run,…
Read moreBearing Spalling – How It Starts, How It Spreads, and the Warning Signs Your Team Can Catch Early
How It Starts, How It Spreads, and the Warning Signs Your Team Can Catch Early Bearing spalling does not happen…
Read more
NLGI Grades Explained – Choosing the Right Grease Consistency for Real Applications
Look at almost any grease container on a maintenance storeroom shelf and you’ll find an NLGI number, usually 0, 1,…
Read more
Mixing Greases – What Really Happens and Why It Causes Failures
What Really Happens and Why It Causes Failures A storeroom runs out of the standard motor grease during a weekend…
Read more
Bearing Failure Modes – What They Look Like and What Actually Causes Them
What They Look Like and What Actually Causes Them A bearing comes off a failed machine and goes into the…
Read moreHow to Select the Right Bearing Viscosity (ISO VG) for Real Operating Conditions
ISO VG selection is not complicated, but it does require understanding three things: what viscosity does inside a bearing, how…
Read moreGrease Composition Explained
What Maintenance Teams Need to Know in the Field The Wrong Grease — Not Contaminated, Not Too Little, Wrong Most…
Read moreGrease vs. Oil Lubrication
The Truth About What Works — and What Destroys Your Equipment Walk through a typical industrial facility and ask maintenance…
Read more